Artecta | Cartago Jade 2835 - 128 - CCT | CRI 90 | 128 LEDs/m | 9,6 W/m | 24V

To help you find the right LED strip for your application, we have categorised our LED strips into series and ranges. The Cartago series is EPREL-compliant, requires a 24-volt power supply and is available in 5-metre lengths. The Ribbon series includes our IP20-certified LED strips for indoor use in dry conditions. Our Dropper series uses a silicone spray coating and has an IP62 rating for use in damp conditions. Our Tube range uses a silicone sleeve to protect the LED strip from dust and water ingress and has an IP65 protection rating. And our Jade range has a silicone sleeve completely filled with silicone, resulting in an IP68 rating. However, please note that permanent outdoor installation of the LED strips is not recommended, as the silicone is not UV-resistant. Our Halo series uses COB LEDs and offers the most even light distribution with indistinguishable light sources.
If you don't need EPREL-compliant LED strips, take a look at the Havana series. For lengths longer than 5 metres, a higher supply voltage is required. For this, we offer our Cali series which uses a 48-volt supply voltage, allowing strips up to 50 metres.

The Artecta Cartago Jade 2835 - 128 is an IP68-rated LED strip with 128 LEDs/m in a silicone-filled sleeve, suitable for use in damp environments (please check with our product specialists before using it outdoors). This also means that heat dissipation is limited, so mounting in a closed profile is not recommended. The LED strip is available in colour temperatures from soft white to neutral white (2700 K to 4000 K) and has a high CRI of 90. With an adhesive backing, it is easy to install on a smooth, degreased surface.
Please note that permanent outdoor installation of the LED strips is not recommended, as the silicone is not UV-resistant and photometric data may vary between production batches within the EU directive due to manufacturing conditions.

Technical specifications
Number of light sources / m: 128
Colour type LED: WW+
Type of diode: SMD2835
Lumen output / m: 1052 lm
CRI: 90
CCT: 2700 K
Input voltage: 24 V DC
Power consumption: 48 W
Power per 1m: 9.6 W
Length (m): 5 m
Cutting length: 62.5 mm
Width (mm): 12.5 mm
IP rating: IP68
Energy efficiency class: F