Voice-Acoustic | Paveosub-218sp DDA | 2x18-inch subwoofer | active | with built-in Dante
The Paveosub-218sp DDA is a highly vented bass-reflex active subwoofer with Dante for the highest demands, generating deep and dynamically high sound pressure levels. Read more
Voice-Acoustic Paveosub-218sp DDA: 2x 18-inch active subwoofer with Dante
The Paveosub-218sp DDA is a highly vented bass-reflex subwoofer with a 3-channel 4 kW power amplifier module and DSP speaker management system for the highest demands in mobile use and fixed installations.
DDA stands for a new generation of DSP and input boards capable of handling a variety of signals: DANTE, digital AES/EBU, AES67 and analogue inputs. The signals can be further looped.
Equipped with two premium 18-inch neodymium chassis, it is capable of generating deep yet dynamic high sound pressure. A low moving mass together with a powerful neodymium drive ensures fast and accurate signal reproduction with excellent fade-in and fade-out behaviour and is sonically superior to many other 18-inch designs. The chassis features a large and highly resilient voice coil, an advanced ventilation system and low-power compression.
The generous bass reflex channels ensure the best possible efficiency and prevent disturbing flow noise to the limit. Lots of bracing and struts suppress enclosure resonances, increase rear damping and make the Paveosub-218sp DDA extremely robust and an ideal tour subwoofer.
Design
The 8 optimised handles with water drainage, which can be surrounded on all sides, ensure easy, back-friendly handling during transport and stacking. The Paveosub can be used both horizontally and vertically. To this end, it has legs on two sides with opposing stacking troughs and two M20 spacer bar flanges.
At the edge, the system is 60 cm wide for the Ikarray-12 line array, making it an elegant unit both optically and mechanically. The stacking troughs match the feet of the Ikarray-12 rigging frame and the Ikarray-12 ground stacking board.
Connections
In addition to the rear connection panel, two Speakon connections are available in the solid speaker grille. These are used for front-end wiring when the bass is located under stage platforms or for connecting inverted basses in cardioid bass arrays. The connection sockets in the grille and the pass-through socket at the rear are protected from moisture with rubber caps.
Transport
There are two options for easy transport:
- with 100 mm rear swivel castors (integrated mounting points for the optional wheel set)
- by means of the stackable single front roll board, secured with butterfly locks
Built-in amplifier and Dante
The Paveosub-218sp DDA is a plug-and-play system: all necessary settings for different configurations are stored as factory settings in its internal memory. Whether for a single bass, in a stack with multiple basses, cardioid and end-fire bass arrays or as the centre of a satellite system in combination with different top parts (passive stereo, bi-amping tops mono), the right preset is easily selected via the display and the The user immediately has the best possible performance and operational reliability.
A number of functions, access options and settings are also available to the experienced technician and audio professional. A display, knob and encoder wheel are integrated at the back, giving access to almost all parameters even without PC control. The functions can be password-locked against unauthorised access. The display can be dimmed and completely switched off in two modes and prevents unwanted stray light. The display is reactivated by pressing a button or the encoder.
The active electronics are convection-cooled by a large heat sink and are maintenance-free. No dust or moisture is sucked in, making the Paveosub-218sp DDA also suitable for fixed fixed installations. The stable cooling fins are generously rounded and have no sharp edges. The control unit, DSP unit and signal connections are protected from moisture with a stable, transparent cover. The cooling line is watertight and the powerCON TRUE1 connections are fitted with a rubber sealing cap.
Specifications
- 2x 18-inch neodymium stroke subwoofer with 4-inch voice coil
- Built-in Dante card
- Lower limit frequency: 32Hz (-10 dB) / 36Hz (-3 dB)
- Impedance: 4Ω, actively separated
- Load capacity: 2400W (AES), 4800W (programme), 9600W (peak)
- Average efficiency 1W/1m: 102.5dB SPL (half-room)
- Sound pressure level: 136dB SPL (AES), 139dB SPL (program), 142dB SPL (peak)
- Connection: 2 x NEUTRIK NL4 IN / OUT 2 +/-
- Polyurea coating in RAL9005
- Dimensions (mm) H x W x D: 600 x 1160 x 770
- Weight: 85.2kg
The Paveosub-218sp DDA also comes in the self-powered version and DSP card or in a passive variant: the Paveosub-218 or Paveosub-218sp.
Low driver power | |
High driver power | |
Power amplifier RMS output | |
Power amplifier peak output | |
Mono inputs | |
THD level | |
Signal-to-noise ratio | |
Amplifier technology | |
Max. SPL | |
Frequency response minimum | |
Frequency response maximum | |
Crossover frequency high | |
Woofer voice coil diameter | |
Compression driver voice coil | |
Dispersion angle (horizontal) | |
Dispersion angle (vertical) | |
Power consumption | |
Height | |
Width | |
Depth | |
Material | |
Weight |